Have you ever wanted to make something beautiful for your wall? Try making art from wood that looks like it’s been touched by the soft glow of a campfire. That’s exactly what this DIY Burned Wood Wall Art is all about. You’ll take pieces of wood and give them a special look by burning them slightly, and when you hang them up, it will add a cozy and unique charm to your room. It’s like bringing a piece of the forest into your home but with a cool, artsy twist! You don’t need to be an expert; anyone can try it and create something amazing.
DIY Burned Wood Wall Art
Materials Needed
- Scrap Wood
- 2 Wooden Panels
- Nails
- Screws
- Keyhole Brackets
- Solder
- Wood Oil
- Wood Glue
Electronics:
- NodeMCU V2 WIFI Board
- WS2812B Ledstrip (60 LEDs/m, 2M length)
- 5V 8A Power Supply
- Logic Level Converter
- 1000uF Capacitor
- DC Power Connector
- Power Cable
- Perfboard
Tools Required
- Soldering Iron
- Cordless Drill
- Blowtorch
- Hot Glue Gun
- Hammer
- Brush
Step-by-Step Guide
Position the Wood: Start by laying out your scrap wood in the desired pattern. For this project, the design includes two broader panels to accommodate an LED strip between them. Once you’re happy with the layout, label each piece of wood to remember its placement easily.
Assemble with Wood Glue: With your wood positioned correctly, begin bonding the pieces using wood glue. Ensure all parts are securely attached, and allow the glue to set for at least 24 hours.
Secure the Mounting: Next, prepare a wooden panel slightly smaller than the front panel’s minimal size and at least 1.5 – 2 cm thick to ensure enough space for the electronics. Attach this panel to the back of your art using nails short enough not to protrude through the front. Fasten keyhole brackets at the corners for easy mounting.
Add a Charred Finish: Using a blowtorch, carefully burn the wood until you achieve a desirable charred appearance. The goal is to darken the wood’s surface without compromising its integrity.
Apply Oil for Enhancement: Erase any visible numbers from the assembly stage, then mix wood oil with a bit of brown paint for a richer color (optional). Apply this mixture to the wood, enhancing its dark, burned effect.
Programming the NodeMCU: Connect your NodeMCU to a computer and install the necessary ESP8266 Board Package. Load the provided Arduino code, adjust settings like your WiFi credentials, and upload it to your board. Check the serial port for a URL to control the LED strip.
Assemble the Electronics :
Follow the circuit diagram to solder your electronics accurately, ensuring the surfboard doesn’t exceed the thickness of your mounting panel. Calculate the power needs for your LED strip and connect an appropriately sized power supply.
Installing the LED Strips: Divide the LED strip into two parts and connect them with a header. This allows for an easy installation and a clean aesthetic between the two panels.
Hang Your Art: Drill screws into the wall at the locations aligned with the keyhole brackets on your art. Ensure the screws are protruding slightly so the brackets can secure onto them.
Light It Up: Finally, Choose from different lighting effects to showcase your new Burned Wood Wall Art in your desired ambiance.
Crafting this Burned Wood Wall Art is not just about creating a piece of decor; it’s an experience that bridges traditional woodworking with modern technology. This project is perfect for those looking to challenge their DIY skills and add a personalized touch to their space. Enjoy the process and the stunning result!
Leave a Reply