The woven paracord bracelet or watchband is a cool, strong band you can make yourself. It uses paracord, a tough type of rope that lasts a long time. You can change its size to fit your wrist perfectly. It’s good for wearing every day and for outdoor fun. If you’re ever in a pinch, you can undo the bracelet and use the cord for all sorts of helpful things. It is easy, and you can pick colours to match your style. Plus, it’s cheap and can handle getting wet without a problem.
The Woven Paracord Bracelet/Watchband is a simple yet stylish accessory for your collection. It’s perfect for those who appreciate minimalist design and practical functionality. Easy to make, this versatile item combines casual fashion with utility. Crafted from durable paracord, it provides an individual flair that complements any outfit and doubles as a handy solution for emergencies, offering peace of mind. Seemingly complex, the weaving process is actually straightforward and even calming, making it an ideal DIY project for beginners.
Making Your Woven Paracord Watchband
Supplies Needed
To create this project, you will need:
- Approximately 10 feet of paracord
- Scissors
- Lighter
- Tape measure
- Hemostats
- A watch (if making a watchband)
- A 5/8″ side release buckle
Step-by-step Process
Step 1: To Begin
Measure about 20 inches from one end of your paracord. Loop this section onto one end of your side release buckle. This will create a longer working end and a shorter end that will be tucked in later.
Step 2: Add the Watch and Adjust for Wrist Size (Optional)
If adding a watch, loop the paracord from the buckle over and under the watch, adjusting for wrist size. Ensure the woven band will comfortably fit your wrist with a little extra length to accommodate tightening during the weave.
Step 3: Begin Weaving
Start weaving the long working end of the paracord around the outer cord, under the centre two cords (treated as one), and around the opposite outer cord. Continue weaving back and forth, keeping the weave tight and uniform.
Step 4: Threading the Watch (If Applicable)
Once the watch is centred, continue weaving your paracord around, keeping a uniform look and tightening as you go. Tools like hemostats can be helpful for managing the cord.
Step 5: Finishing Up
To finish, thread the working strand through some of the centre weaves towards the buckle end. Trim and melt the end to prevent fraying, then tuck it under the weave. Repeat for any other loose ends.
Post-Creation Tips
- Cleaning: Paracord bracelets/watchbands can be cleaned with soap and water using a soft-bristle toothbrush.
- Paracord Shrinkage: Be aware that paracord might shrink (10%-12%), especially specific colours. Consider this when measuring and cutting your cord.
Conclusion
The final product should be a snuggly-fitting, durable piece of wristwear. Enjoy wearing your new paracord bracelet or watchband! Remember, the total length might be about 1 inch longer than the starting measurement due to tightening during the weave. Adjust as necessary for a perfect fit.
Leave a Reply