Invite a tiny blue helper to your gaming corner with DIY Resin Minecraft Allay, featuring delicate wings, a sweet face, and a floating look fans will love.
A glowing blue figure can give a display a magical feeling without many extra decorations. DIY Resin Minecraft Allay takes inspiration from the small flying helper seen in Minecraft, turning its light body and delicate wings into a tiny collectible. Its gentle shape and cool colors look especially nice against a plain background.
Say Thanks & Supports To : PolymomoTea
Blue Wing Magic With DIY Resin Minecraft Allay
An Allay has a little face, a floating body, and wings that stretch out from the sides. Those features are important here because they give the character its familiar outline. Shades of pale blue and deeper blue can separate the body from the wing details. Clear or lightly tinted resin may help the figure appear airy, while small dark eyes keep the face easy to read. The simple shape leaves space for a smooth, clean finish.
Unlike a large display with many pieces, this miniature depends on careful proportions. The wings should feel light beside the body, and the head should stay the main focus. After the resin has cured, the figure can be set on a small stand or placed with other game-inspired decorations.
For Minecraft fans, it is a charming reminder of a helpful little friend from the game. It suits a gaming shelf, a desk beside the monitor, or a small gift box for someone who likes blue characters. The finished piece feels peaceful, light, and full of personality.
Minecraft Allay Resin Cube Figure – Easy Tutorial
In this project, you’ll learn how to create a stunning Minecraft Allay figure entirely out of resin cubes, capturing that pixel-perfect look. We’ll make different shades of blue resin cubes, arrange them into the Allay’s body, and use UV resin to glue each piece together for a magical, translucent finish.
Materials & Tools
Materials
- Two-part epoxy resin (for casting cubes)
- UV resin (for gluing and glazing)
- Resin pigment or blue dye (several shades of blue needed)
- Resin tape (or strong clear tape)
- Wooden block (to create a flat surface for arranging cubes)
- Silicone Cube Mold (for making the 3D resin cubes)
- Silicone mold-making putty/compound (for creating custom flat wing/pieces molds)
- Extra resin cubes (can use leftovers or ones from previous projects for details)
- UV Lamp (for curing UV resin)
Tools
- Mixing cups and stirrers (for resin)
- Scissors or craft knife
- Tweezers (for handling small cubes)
- Small tray (for making wings/details)
- Small stand/mount (optional, to help the figure stand or display)
Step-by-Step Instructions
1. Cast the Resin Cubes
- Mix two-part resin: Follow the package instructions and mix enough resin for your project.
- Tint in various shades of blue: Split the resin into several cups and tint each one a different shade of blue. You need seven shades for accuracy, but use what you have!
- Pour into cube mold: Fill the silicone mold with your colored resin for each shade. Level the tops with a stick or craft blade.
- Let cure completely as directed—generally, 24 hours for two-part resin. Remove cubes from the mold when done.
- (Optional: Prepare a few extra cubes for possible mistakes or future projects.)
Tip: If colors aren’t perfect, don’t stress! Any variation adds to the “pixel” look.
2. Build the Allay Head
- Stick cubes onto a flat surface: Use resin tape (or regular tape) sticky-side-up on top of a wooden block to help you build the face pattern of the Allay.
- Arrange blue resin cubes following a pixel-art style reference for Allay’s head.
- Seal with UV resin: Carefully glaze the assembled head face with a thin layer of UV resin, then cure under a UV lamp.
- Repeat for other 5 sides of the head (back, left, right, bottom, and top), building each surface the same way. After each assembly, cure the UV resin.
- Peel off the tape gently when cured.
3. Assemble the 3D Head
- Glue sides together: Attach the sides around the back piece using UV resin at the seams and cure after each step, building up the cube “shell.”
- Add the bottom, then the face, then the top: Always brush thin UV resin at joining edges and cure with the lamp before moving to the next piece.
- Final glaze: Brush a final layer of UV resin over the outside/top for gloss and extra stability. Cure again.
Tip: Take your time lining up the pixels for that signature Minecraft look!
4. Build the Body
- Arrange cubes to form the body shape: The body is a bit smaller and may have a missing corner. Reference a sprite if needed.
- Glue sections together with UV resin, curing after each step.
- Leave the bottom open to attach to the head later.
- Once built, apply a thin UV resin glaze to the body as well for a shiny, finished look.
5. Create Wings and Details
A. Make Flat Clear Pieces (Wings and Skirt/Frills)
- Make a DIY flat mold: Mix a 1:1 ratio silicone mold-maker. Pour in a tray, and press in your extra resin cubes (or leave it as a flat strip) to create custom square or rectangle cavities. Let set per instructions.
- Cast four shades of blue resin in the custom mold for the wings and skirt/frill parts. Cure under the UV lamp.
- Build wing patterns: Use resin tape to arrange the flat squares in the wing pattern; Allay’s wings are made of pixels, so refer to pixel art for accuracy.
- Seal with UV resin: Carefully glaze, cure, and unstick from tape.
- For skirt/frills: Use small, Tetris-like shapes under Allay’s body. Trim or arrange as desired.
6. Attach Arms, Wings, and Skirt/Details
- Arms: Arrange and glue together single rows of resin cubes using UV resin.
- Attach arms to the body at a slant for cute posing. Cure after positioning.
- Attach skirt/frill pieces to the bottom edge of the body using UV resin and resin tape for support while curing.
- Wings: Attach wings to the body with a dab of UV resin at an angle appropriate to the Allay’s posture. Cure after each wing.
Tip: Cure one appendage at a time for clean placement.
7. Final Assembly & Touches
- Attach the completed body to the head: Add UV resin to connecting surfaces; cure firmly.
- Apply a final UV resin glaze to the whole model for shine and to even out the finish.
- Let set to complete the curing.
- (Optional) Place on a small stand for display, if desired.
Tips & Explanations
- Color Mixing: You don’t need exact match pigment for Allay—shades just need to be varied for Minecraft’s pixel effect.
- Glazing: UV resin gives your model a professional, glassy Minecraft look and strengthens the structure.
- Assembly Order: Always cure each section before attaching a new one and work patiently.
- Reference Images: For cube placement and details, reference screenshots or pixel art of Minecraft Allay.
Conclusion
That’s it! You have made a beautiful, translucent Minecraft Allay figure using custom-colored resin cubes. Display it proudly next to your other creations or give it as a unique gamer gift.
Leave a Reply