Let’s make a sleek, mid-century-inspired wood plant stand followig this super fun and easier DIY project. Not only is it a project that can add a dose of style to any room, but when you DIY, you can customize it to perfectly fit your space and style—and save a bundle in the process. Let’s dive into how you can create this standout piece, starting from the raw materials up to the final touches.
DIY Plant Stand Project
Materials List
- Poplar board
- Four dowels
- Wood glue
- Wood stain (Early American recommended)
Tools Used
- Band saw or a small hand saw
- Drill press with a 7/8” Forstner bit
- Miter saw
- Clamps
- Combination square
- Sandpaper
- Hammer or a soft mallet
Step-by-Step Guide
Measure and Mark Your Cuts
Start by assessing the size of your planter to determine the dimensions of your plant stand. Cut your poplar board into two equal lengths and secure them side by side with clamps. Locate and mark the center point across both pieces. Measure 3/8” on each side of this center point and mark again, ensuring accuracy with a combination square. Also, define the depth of each cut by marking at 3/4 inch deep, preparing for a notch that matches the thickness of the board. Before unclamping, measure and mark the required length for the support beams ensuring each side retains symmetry.
Cut the Support Beams
Using a band saw, carefully cut out the marked notches. To ensure the beams fit securely around the dowels, use a drill press equipped with a 7/8” Forstner bit. Align the bit exactly along the marked lines and drill through cleanly to shape the edges where the support beams will hug the dowels.
Cut the Dowels
Determine the desired height for the plant stand’s legs, accounting for how far you want the planter to be elevated. Measure and cut the dowels accordingly, ensuring each is of equal length for stability. Use a miter saw with a stop block to guarantee precision. After cutting, sand the edges of the dowels to round them slightly for a smoother finish.
Assemble With Dowel Pins
After cutting the dowels and beams, you’ll need to secure them together with dowel pins for added stability. Create a pin-placement template out of cardboard to keep your drill holes aligned. Transfer these marks onto the stand components and bore the holes with a 1/4″ Forstner bit. Start by dry-fitting the pieces to check alignment; minor adjustments can be made before applying glue. Once satisfied, apply glue, assemble the parts, and use clamps to hold everything until the glue sets.
Final Reveal
After the glue has dried, assemble the cross beams and gently tap them together using a hammer or soft mallet to ensure a snug fit. Apply your chosen finish, such as Early American wood stain, for a professional and polished look. This final step will not only enhance the appearance but also protect the wood.
Conclusion
With the stand complete and your planter proudly perched atop, enjoy the functional beauty of your creation and the personal touch it adds to your space. Whether nestled in a cozy corner or featured prominently in your living room, this wood plant stand is sure to command attention and spark conversations.
Leave a Reply