Ever wanted to blend sleek modernity with natural elegance in your DIY furniture projects? Creating an aluminium and bamboo table offers just that, mixing the industrial vibes of extruded aluminium with the warm tones of bamboo plywood. Whether you’re planning to jazz up your home office or offer a new look to your living space, this table design is versatile, durable, and stylish. Plus, it’s an environmentally conscious choice, using materials that are readily recyclable and can be reconfigured throughout their lifecycle.
Aluminum And Bamboo Table
Materials Needed
- Aluminium Frames: Use a proprietary aluminum section system such as 80/20, known for its versatility and ease of assembly.
- Bamboo Plywood: Opt for Plyboo or a similar bamboo lamination composite for the tabletop.
Tools Required
- Allen Key: Fits the screw size chosen for assembling the frame.
- Drill: Used for creating tapping holes in the legs and pilot holes on the underside of the tabletop.
- Tap: Corresponds to the foot screw size for threading.
- Saw: A hacksaw or suitable drop saw to cut aluminum sections to the required lengths.
Fabrication Process
Step 1: Pre-Assembly of Aluminum Pieces
Begin by loosely inserting the sliding screws into the right-angle brackets and triangular 4-screw brackets. It’s easier to manage this assembly before sliding them into the 80/20 aluminum T-slot.
Step 2: Assemble Aluminum Skeleton Part 1
Lay out the table top support sections. Attach them at the inner corners using the right-angle brackets. Proceed to add the triangular 4-screw brackets at the corners of these sections.
Step 3: Assemble Aluminum Skeleton Part 2
Insert the leg sections into their respective places on the frame. Tighten the screws on all brackets just enough to minimize movement but still allow for adjustments.
Step 4: Drill Out and Tap the Holes for the Feet
The legs of the aluminum come with a hollow center which requires enlarging and tapping to fit the foot fixtures.
Step 5: Attach the Bamboo Table Top
Flip the tabletop upside down on a clean surface to prevent damage. Center the frame onto the tabletop, ensuring a consistent border around. Drill guide holes for each bracket that connects the table supports to the tabletop and fasten them securely.
Step 6: Final Assembly and Adjustments
Ensure all connections are tight and well-fitted. Adjust the table legs to ensure they are snug against the supports. Turn the table right side up, check for level, and make any necessary adjustments to the table feet for stability.
Conclusion
A freshly brewed cup of tea is a fitting celebration after the assembly of such a fine piece of furniture. This aluminum and bamboo table not only serves as a functional item but also as a testament to what one can achieve with the right tools and a bit of creativity. Enjoy the fruits of your labor with a well-deserved break, and maybe even start planning your next project.
Leave a Reply