Are you ready to catch the next solar eclipse without missing a thing? We’ve got you! We’re here to guide you through making your own Solar Eclipse Glasses. You can create these cool glasses at home with just a few things you probably already have. This way, you can watch the eclipse without hurting your eyes, and let me tell you, it’s super exciting to watch with your hand-made glasses. We will show you some fun and easy ideas to set you up in no time. Follow along and make watching the solar eclipse a memorable adventure!
DIY Solar Eclipse Glasses
How To Make A Solar Eclipse Viewer
Uses: Perfect for use during those special times when the moon stands between the Earth and the sun, this viewer helps you behold the spectacle without hurting your eyes. It’s not just a tool but your personal gateway to witnessing one of nature’s most awe-inspiring shows.
Materials:
Box with a lid (A shoebox is an excellent choice.)
Aluminum foil
A small piece of white paper
A utility knife or hobby knife
Making:
First, cut a small square hole on the shorter end of a box, preferably a shoebox. Cover this square with a piece of aluminum foil and create a small pinhole in its center. This hole is where the sun’s light will enter. Inside the box, on the side opposite the foil-covered hole, attach a piece of white paper where the sunlight will be projected. Finally, make another small hole on the longer side of the box—a peephole through which you can watch the sun’s image projected on the white paper.
DIY Solar Eclipse Glasses
Uses: Behold one of the rarest celestial events safely with the DIY Solar Eclipse Glasses. This do-it-yourself innovation safeguards your eyes during these awe-inspiring moments when the moon perfectly aligns between Earth and the sun.
Materials:
Cereal box
Nail
A plain sheet of white paper
Aluminum foil
Scissors
Tape
A pencil
Making:
The construction of the DIY Solar Eclipse Glasses is straightforward! Start by fitting a trimmed piece of plain white paper in the bottom of a common cereal box. Cut two rectangles at each top corner of the box and then tightly secure a piece of aluminum over the left corner. In the center of the foil, create a small opening with a nail. When the time comes for the celestial event, face away from the sun and peek through the right hole. The sunlight directs through the tiny cavity in the foil, casting a projection on the white paper at the box’s bottom.
Solar Eclipse Viewer DIY
Uses: The viewer allows you to observe this celestial spectacle with your own eyes, positioning you directly under the mysterious dance of the universe.
Materials:
Cereal box
Nail
Duct tape
Scissors
Medium size snack cracker boxes
Glass filter plates (often used for welding helmets)
Optional: Self-adhesive shelf and drawer liner (for decoration)
Making:
Cut a snack cracker box to fit your face, making a comfortable spot for your nose at the bottom and a curve at the top for your forehead. Cut an opening on the other side of the box, ensuring it’s smaller than the actual glass filter plate. Place the glass filter plate over the opening and secure it with duct tape. The tape should seal around the edges of the glass, preventing any unnecessary light from entering. Voila, your Solar Eclipse Viewer DIY is ready to use, enabling you to appreciate an eclipse in real time.
DIY Solar Eclipse Viewers
Uses: With one of these viewers, the big day turns into a safe yet thrilling show. Watching the sun hide behind the moon and peek out again becomes not just possible but a moment of pure wonder.
Materials:
A small, long box (like for cereal or crackers)
White paper
Aluminum foil
Pin or nail (to make the pinhole)
Tape
Making:
To make your viewer, take a simple box – think of the type that holds your cereal or crackers. On one end, close it up with a piece of aluminum with a tiny spec of a hole. This little dot lets the sun’s light stream safely into your box. Then, on the other side, put a plain piece of paper where you’ll see the sun’s shadow play. When the eclipse comes, look inside your box from the other side, and you’ll watch the moon’s silhouette glide across the sun on the paper screen.
DIY Cheap Solar Eclipse Glasses
Uses: DIY Solar Eclipse Glasses are simple, cost-effective viewing tools that allow you to appreciate and bask in the grandeur of astronomical phenomena.
Materials:
Empty cereal box
White printer paper
Tinfoil
Scissors
Safety pin
Scotch tape
Pen or pencil
Making:
First, fit a piece of white paper inside a cereal box to act as your screen. Then, cut two holes in one end of the box. Cover one hole with foil punched with a tiny pin to let sunlight through. When the eclipse starts, the sun will shine through this pinhole and project onto the paper inside the box, letting you watch the sun disappear and reappear, all safe and sound.
How to make DIY Eclipse glass
Uses: DIY Eclipse Glasses open a window to the skies, letting everyone safely watch the sun play peek-a-boo with the moon during a solar eclipse. Armed with a comfy card frame and a trusty solar-safe screen, you can watch the daytime wonder worry-free.
Materials:
Solar filter material (ISO 12312-2 certified)
Cardboard or firm cardstock
Strong adhesive that dries quickly
Scissors
Making:
Start building your eclipse glasses; line up a special solar filter and cardboard to storm your imagination into action. Measure and snip out two even lengths of cardboard to rest easy on your nose. Then, snug in the solar filter inside the cardboard frames and stick them tight so that no pesky light sneaks in. With the glasses on, the filter should be the only thing you see through, letting only the eclipse’s safe light show in.
Solar Eclipse Pinhole Projector DIY
Uses: This little projector keeps eyes safe while letting eager watchers turn a dot of sunlight into a cool, moon-crossed sun show on a screen.
Materials:
Chip can
White paper
Matte black spray paint
Drill or Dremel with a small bit
Scissors
Measuring tape
Making:
To set up your tiny sun theater, start by snipping a rectangle on one end of a snack chip can; this is your peek window. Then, swoosh some black paint inside for a clear picture without glares. Next, spin a small hole right in the can’s bottom — the secret path for sunlight. Finally, slide a white paper circle inside the lid, snap it on, and voila! Your eye-safe eclipse viewer is all set to reveal the sun’s secret moves.
DIY Solar Eclipse Glasses
Uses: Transform a cereal box into your very own Solar Eclipse Glasses! These Glasses fling open the door to gaze at a solar eclipse at home and with safe peepers.
Materials:
Shade #12-14 welding glass
Empty cereal box (at least 2 inches wide)
Scissors
Ruler
Pencil
Double sticky tape
Foam
Making:
Creating these glasses starts with snipping the top of an empty box to shape a snug face brace. Once you’re happy with the fit, pop a welding glass center-bottom and secure it. Next off, stick a cardboard cover around the glass. By now, you’ve got a pinhole camera set with a sky-facing peephole; the viewfinder captures the sun, eclipse, and all, straight into your homemade eclipse glasses.
Leave a Reply